MVQUICK
The first and all-purpose Hot-Swap adapter
Specifications:
- Nominal Voltage: 14.8V
- Voltage range: 10.8V ~ 16.8V
- Nominal Capacity: 1.5Ah, 21Wh
- Max. discharge current: 10A
- About up to 10~15 minutes runtime when used standalone as an UPS backup battery
- Installable on any V-Lock enabled device
- Self charging through the installed battery, can be charged also on any V-Lock chargers
- Allow data communication from battery to camera
- Size: 142 x 83 x 50mm (5.59" x 3.27" x 1.97")
- Weight: 0.49Kg (1.08lbs)
- NEW: enhanced contact protection for safer air transport
Description
MVQUICK is a hot swap system to be installed as a battery interface between the camera (or any other V-lock compatible device) and the battery pack. The main purpose is to allow camera battery replacement without any power interruption through an automatic detection of the battery removal.
Additionally, MVQUICK provides an alternative power source of about 21Wh to be used as UPS in case of a sudden power failure or extended power requirements.
High-load cell technology permits discharging of up to 10A when used as a stand alone power source.
Automatically recovers a part of the energy spent during the hot swap period upon reinstatement of a fresh battery, and due to this features allows several hot swap operationswithoutn needing any further charge.
If used as UPS device, it can be charged normally on standard Vlock chargers.
MVQUICK is designed to work perfectly with cameras using BLUESHAPE battery communication protocol.
A recent addition is the CONTACT COVER (shown here) that we started including on every V-mount battery that comes out of our production as the ultimate protection against short circuit of the contacts.
This cover does exactly what it says and makes it virtually impossible for a short between the terminals to occur during transport. This is our latest enhancement in our list of safety features that give maximum protection, especially important during air transport.
We request our clients to store the original boxes and also the CONTACT COVERS so as to reuse them if our batteries need to be transported in any aircraft.
Additionally, MVQUICK provides an alternative power source of about 21Wh to be used as UPS in case of a sudden power failure or extended power requirements.
Principle of operations
Installation
MVQUICK is installed as an interface between the battery and the device to power.
During normal operation, the battery powers the camera and MVQUICK monitors the battery for an immediate takeover in case of need.
During normal operation, the battery powers the camera and MVQUICK monitors the battery for an immediate takeover in case of need.
Battery removal
When the battery is removed or when it becomes empty (with voltage below 13V) MVQUICK provides instantaneous power to the camera without any interruption.
As soon as MVQUICK starts to operate, the LEDs light up indicating the state of the available internal power.
As soon as MVQUICK starts to operate, the LEDs light up indicating the state of the available internal power.
Usage as independent power source
In case of emergency, MVQUICK can even be used as a stand alone power source (21Wh available when fully charged).
It provides around 10~15 minutes of further runtime even in use with power hungry devices.
During all this time the LEDs remain lit.
It provides around 10~15 minutes of further runtime even in use with power hungry devices.
During all this time the LEDs remain lit.
Battery reinstallation
When a new battery is installed (with battery voltage > 14V), MVQUICK turns off automatically leaving the battery to power the device.
The energy lost by MVQUICK to sustain the camera during the battery swap operation is automatically and silently replenished from the fresh battery without affecting the operation. This process allows unlimited hot-swap operations and practically a continuous power source. In case of need, MVQUICK can be quickly charged on any V-Lock charger as a normal battery.
The energy lost by MVQUICK to sustain the camera during the battery swap operation is automatically and silently replenished from the fresh battery without affecting the operation. This process allows unlimited hot-swap operations and practically a continuous power source. In case of need, MVQUICK can be quickly charged on any V-Lock charger as a normal battery.
High-load cell technology permits discharging of up to 10A when used as a stand alone power source.
Automatically recovers a part of the energy spent during the hot swap period upon reinstatement of a fresh battery, and due to this features allows several hot swap operationswithoutn needing any further charge.
If used as UPS device, it can be charged normally on standard Vlock chargers.
MVQUICK is designed to work perfectly with cameras using BLUESHAPE battery communication protocol.
A safer little detail
We care and strongly respect the IATA requirements when it comes to transporting batteries. Towards this, we have adopted high quality individual packaging for every individual battery.A recent addition is the CONTACT COVER (shown here) that we started including on every V-mount battery that comes out of our production as the ultimate protection against short circuit of the contacts.
This cover does exactly what it says and makes it virtually impossible for a short between the terminals to occur during transport. This is our latest enhancement in our list of safety features that give maximum protection, especially important during air transport.
We request our clients to store the original boxes and also the CONTACT COVERS so as to reuse them if our batteries need to be transported in any aircraft.
Details
 |
LED indicators showing state of charge of internal battery |
 |
Push button for capacity check |
 |
Installation interface for external V-Lock battery |
 |
Output connector (power outlet, to camera) |
 |
Data communication selector to enable or disable battery communication to camera |
 |
D-Tap auxiliary connector |
 |
V-Lock interface for MVQUICK installation |
Gallery
MVQUICK
MVQUICK left side
MVQUICK right side
MVQUICK upright front
MVQUICK upright back
MVQUICK side view
Videos
January 2011
Quick Changer the battery Hot-Swap adapter
MVQUICK is a hot swap system to be installed as a battery interface between the camera (or any other V-Lock compatible device) and the battery pack. The main purpose is to allow camera battery replacement without any power interruption through an automatic detection of the battery removal.
Additionally, MVQUICK provides an alternative power source of about 21Wh to be used as UPS in case of a sudden power failure or extended power requirements.
MVQUICK is designed to work perfectly even with RED® ONE cameras.
Other models are available to fit different cameras.
Downloads
Manual
 MVQUICK Operator manual - Version:1.2 (337.3 KB) |
Hot-Swap adapter MVQUICK operator manual |
Certifications
| MVQUICK CE Certificate - Version:1.0 (329.2 KB) |
CE certificate of conformity for MVQUICK |
| MVQUICK Transport Certificate - Version:1.0 (692.42 KB) |
UN38.3 IATA Transport declaration for MVQUICK |
| MSDS - Version:1.2 (65.0 KB) |
Material Safety Data Sheet for batteries |
Application Notes
| IATA Li-Ion Air Transport guide - Version:2014 (121.94 KB) |
2014 update of the IATA air transport regulations for rechargeable lithium ion, with a dedicated focus on BLUESHAPE batteries range |
